Kinkou158 Sonyard
* Cimma haduwa da babban tsayayyen ƙarfi da ƙarfi. Na iya yin tsayayya da matakan tasiri mai ƙarfi. Na iya haduwa da mafi mahimmancin bukatun tsayayyen tsari da matsin lamba. Juyin damuwa na daddare yana motsa jiki yana da matukar kyau fiye da berylium jan karfe sabo.
2. Kyakkyawan aikin anti-se onaring, tare da aikin ingancin kayan aikin mutum ba tare da fannoni biyu ba don bangaren saukarwa na mai da kyau ta haɗa sanda Kuma zazzabi mai zafi da kuma saurin ɗaukar kaya.
* Juya wasan kwaikwayon yayi daidai da sauki juyawa tagulla Alloy yana da sauƙin aiwatarwa cikin abubuwan da ke hadaddun.
* Ya dace da kowane irin yanayi na acidic ko ruwan gishiri, babban zazzabi mai lalacewa.
* Kyakkyawan walkiya.
* Zafin nan na lantarki yana da matukar muhimmanci fiye da berylium jan karfe sabo. Ba ya haifar da Magnetism kuma abu ne da ya dace don masu haɗin zazzabi da masu haɗin RF.
* Marasa guba mai guba da kuma marasa lahani, kayan abokantaka na muhalli.
1. Abubuwan sunadarai naC72900
| Abin ƙwatanci | Ni | Sn | Sauran abubuwan allons | Rashin hankali | Cu |
| 14.5-15.5 | 7.5-8 | 0.2-0.6 | ≤00.15 | Sakewa |
2. Kayan jiki na C72900
| Modulus na roba | Ratio Ratio | Aikin lantarki | A halin da ake yi na thereral | Amfani da yaduwar yaduwa | Yawa | Gangara |
| 21 × 10 ^ 6psi | 0.33 | <7% IACs | 22 btu / ft / hr / ° f | 9.1 × 10 ^ -6 A / IN / ° F | 0.325 lb / A ^ 3 | <1.001 |
| 144K / mm ^ 2 | <4 ms / m | 38 w / m / ℃ | 16.4 × 10 ^ -6 M / M / ℃ | 9.00 g / cm ^ 3 |
3. Mafi qarancin kadarorin kwamfuta na C72900
| Jiha | Diamita | Yawan amfanin ƙasa 0.2% | Estimate tenerile ƙarfi |
| Elongation | Ƙanƙanci | Matsakaiciyar tsarin cvn cvn | ||||
| inke | mm | ksi | N / mm ^ 2 | ksi | N / mm ^ 2 | % (4D) | HRC | ft-lbs | J | ||
| Sanda | Ts 95 | 0.75-5.25 | 19-82 | 95 | 655 | 106 | 730 | 18 | 93 hrb | 30 * | 40 * |
| 3.26-6.00 | 83-152.4 | 95 | 655 | 105 | 725 | 18 | 93 hrb | 30 * | 40 * | ||
| Ts 120U | 0.75-1.59 | 19-40.9 | 110 | 755 | 120 | 825 | 15 | 24 | 15 | 20 | |
| 1.6-5 | 41-82 | 110 | 755 | 120 | 825 | 15 | 24 | 12 | 16 | ||
| 3.26-6.00 | 83-152.4 | 110 | 755 | 120 | 825 | 15 | 22 | 11 ** | 14 ** | ||
| Ts 130 | 0.75-6-6.00 | 19-152.4 | 130 | 895 | 140 | 965 | 10 | 24 | - | - | |
| Ts 160U | 0.25 | <6.35 | 150 | 1035 | 160 | 1100 | 5 | 32 | |||
| 0.26-0.4 | 6.35-10 | 150 | 1035 | 160 | 1100 | 7 | 32 | ||||
| 0.41-0.75 | 10.1-19 | 150 | 1035 | 165 | 1140 | 7 | 36 | ||||
| 0.76-1.6 | 19.1-41 | 150 | 1035 | 165 | 1140 | 5 | 34 | ||||
| 1.61-3.25 | 41.1-82 | 150 | 1035 | 160 | 1100 | 3 | 34 | ||||
| 3.26-6.00 | 83-152.4 | 148 | 1020 | 160 | 1100 | 3 | 32 | ||||
| Waya | Ts 160U | <0.25 | <6.35 | 150 | 1035 | 160 | 1100 | 5 | 32 | ||
| 0.26-0.4 | 6.35-10 | 150 | 1035 | 160 | 1100 | 7 | 32 | ||||
| Bututu | Ts 105 | 1.50-0.05 (diami na waje) | 38-77 (diami na waje) | 105 | 725 | 120 | 830 | 15 | 22 | ||
| 1.50-0.05 (diami na waje) | 38-77 (diami na waje) | 105 | 725 | 120 | 830 | 16 | 22 | 14 *** | 19 *** | ||
| Ts 150 | 1.30-3.00 (diamita ta waje) | 33-76 (diami na waje) | 150 | 1035 | 158 | 1090 | 5 | 36 | - | - | |
| *: Duk wani darajar ba kasa da 24 ft-lbs (32J) | |||||||||||
| **: Duk wani darajar ba kasa da 10 ft-lbs (13.5J) | |||||||||||
| ***: Duk wani darajar ba kasa da 16J; samfuran kawai na CVN (10mm Weidth X 10mm | |||||||||||
4. Amincewa da SORD DA Way na C72900
| Jiha | Iri | Diamita | Haƙuri na diamita | Haƙuri na kai tsaye | |||
| inke | mm | inke | mm | inke | mm | ||
| Ts 160U | Sanda | 0.25-0.39 | 6.35-9.9 | +/- 0.002 | +/- 0.05 | Tsawon = 10ft, karkacewa <0.25 inci | Tsawon = 3048mm, karkacewa <6.35mm |
| 0.4-0.74 | 10-18.9 | + 0.005 / -0 | + 0.13 / -0 | ||||
| Ts 95, Ts 120u, TS 130, Ts 160U | Sanda | 0.75-1.6 | 19-40.9 | + 0.02 / + 0.08 | + 0.5 / + 2.0 | Tsawon = 10ft, karkacewa <0.5 inci | Tsawon = 3048mm, karkacewa <12mm |
| 1.61-2.75 | 41-70 | + 0.02 / + 0.10 | + 0.5 / + 2.5 | ||||
| 2.76.25 | 70.1-82 | + 0.02 / + 0.145 | + 0.5 / + 3.7 | ||||
| 3.26-6.00 | 83-152.4 | + 0.02 / + 0.187 | + 0.5 / + 4.75 | ||||
| Ts 160U | Waya | <0.4 | <10 | +/- 0.002 | +/- 0.05 |
|
|
5. Tabbas haƙuri na bututu na C72900
| Jiha | Diamita | Kauri | Haƙuri na diamita | Haƙuri na kai tsaye | |||
| inke | mm | mm | inke | mm | inke | mm | |
| Ts 160U | 1.50-1.99 | 38-50 | 10-20% na diamita na waje * | ± 0.010 | ± 0.25 | Tsawon = 10ft, karkacewa <0.5 inci ** | Tsawon = 3048mm, karkacewa <12mm |
| 2.00-3.05050 | 51-76 | 10-20% na diamita na waje * | ± 0.012 | ± 0.30 | |||
| Ts 150 | 1.30-1.99 | 33-52 | 8-20% na diamita na waje * | ± 0.008 | ± 0.20 | Tsawon = 10ft, karkacewa <0.5 inci ** | Tsawon = 3048mm, karkacewa <12mm |
| 2.00-3.00 | 53-79 | 6-10% na diamita na waje * | ± 0.010 | ± 0.25 | |||
| *: Don tunani kawai. Da fatan za a duba tare da shuka mai ƙarfe don girman da ake buƙata | |||||||
| **: Karamin haƙuri | |||||||
6. Aikace-aikacen C72900
Ana amfani da shi akasari don sucker Rod tare, kayan aiki Mwd, kayan shafe da kafet a cikin masana'antar Petrooleum;
Jirgin sama mai saukar da suturar gashi da kuma kiyayya; Matsin lamba na jirgin ruwa; Jagorar Slide; babban zazzabi mai tsayayye da mahimman masu iya jurewa da lalata. da sauransu
